Siemens SENTRON PAC1020 Manual page 72

Technical data
Connection components: Digital inputs/outputs, RS485 interface
Connection components: Digital inputs/outputs, RS485 interface
Conductor cross-section for copper
cable (Cu)
2 conductors with the same cross-
section
Dimensions and weights
Dimensions and weights
Type of mounting
Enclosure dimensions W x H x D
Cutout (W x H)
Permissible panel thickness for installation
70
Rigid
Flexible
Flexible with end sleeve, without plastic
sleeve
Flexible with end sleeve and plastic
sleeve
Rigid
Flexible
Flexible with end sleeve, without plastic
sleeve
Flexible with TWIN end sleeve and plas-
tic sleeve
Tightening torque
1 x 0.34 ... 2.5 mm
2
(AWG 22 ... 14)
1 x 0.34 ... 2.5 mm
2
(AWG 22 ... 14)
1x 0.34 ... 1.0 mm
2
(AWG 22 ... 18)
1x 0.34 ... 1.0 mm
2
(AWG 22 ... 18)
2x 0.34 ... 0.5 mm
2
(AWG 22 ... 20)
2x 0.34 ... 0.5 mm
2
(AWG 22 ... 20)
1x 0.34 ... 0.5 mm²
(AWG 22...18)
1x 0.34 ... 1.0 mm²
(AWG 22...20)
0.3 Nm
(2.6 lb-in)
Panel mounting to IEC 61554
96 mm x 96 mm x 46 mm
92 mm +0.8 mm x 92 mm +0.8 mm
d = 1 ... 2 mm
In the case of panel thicknesses where
d ≠ 1 ... 2 mm, installation is possible
using optionally available mounting
brackets (7KM9900-06A00-0AA0).
Equipment Manual, 05/2020, L1V30610008B-01
PAC1020