Appendix; Installing The Printer Driver - Canon BJC-S200 Quick Start Manual

S200 QS.book Page 39 Tuesday, September 18, 2001 9:02 AM

Appendix

Installing the Printer Driver

If you are re-installing the printer driver, first follow the uninstall procedures on
page 41 to remove the existing printer driver before you re-install.
To install the printer driver in Windows:
1.
Unplug the printer.
2.
Make sure the USB cable between the printer and computer is securely
connected.
3.
Turn the computer on, and close any open software applications. Insert the
S200 Setup Software & User's Guide CD-ROM in the CD-ROM drive. The setup
program should run automatically.
4.
Read the License Agreement, then click Yes, if you agree.
5.
When the main menu appears, ensure that the printer driver is selected and
click Install. The printer driver will start loading automatically.
When installing the printer driver in Windows XP/Windows 2000,
log on to the system as a member of the Administrators group.
If the printer was on when the setup program started, the Add
New Hardware Wizard will appear. Do NOT use the wizard—click
Cancel to close the window and continue.
If the setup program does not run automatically, click Start, then
Run, then type x:\msetup.exe (where x is the CD-ROM drive).
If a message prompts you to restart Windows, remove the
CD-ROM, then click OK. After the computer restarts, re-insert the
CD-ROM and continue.
39