Printing Maintenance - Canon BJC-S200 Quick Start Manual

S200 QS.book Page 22 Tuesday, September 18, 2001 9:02 AM

Printing Maintenance

4.
Click to check Display low ink warning, then click Send.
5.
If you have just installed one or both ink tanks, reset the ink counter for the
new tank(s). See "To reset the ink counter in Mac OS" on page 24.
To check ink levels in Windows:
1.
With the printer on, click Start, then Settings, then Printers.
2.
Right-click the Canon S200 icon, then select Properties.
3.
Select the Maintenance tab, then click Start Status Monitor. The BJ Status
Monitor will appear.
The Printer Status tab displays the ink levels for each tank. The following
icons may appear above the ink tanks on the BJ Status Monitor:
Ink low. Replace ink tank as soon as possible.
Ink out. The ink tank may have run out of ink.
Not synchronized. The ink level may not
be synchronized with its ink counter. For
information on how to synchronize ink
levels and counters, see "To reset the ink
counter in Windows" on page 24.
To check ink levels in Mac OS:
If background printing is enabled and the low ink warning is turned on, the
BJ Print Monitor will display ink levels while printing.
By default, Background Printing is Off.
1.
Select Chooser from the
Apple menu.
2.
Set Background Printing to On.
3.
When a job is printing, note the ink
level on the BJ Print Monitor.
22