Canon PIXMA MP600 Quick Start Manual page 54

6
Install the ink tank.
(1) Insert the front end of the ink tank into the Print
Head.
(2) Press on the
ink tank snaps firmly into place.
(3) Make sure that the ink lamp lights up red.
Important
The machine cannot be used unless all the ink tanks
are installed.
7
Close the Inner Cover.
Note
Make sure that the Inner Cover is closed. Printing will
not start with the Inner Cover open since paper can not
be fed properly.
8
Gently close the Scanning Unit (Printer Cover).
Caution
Be sure to hold the Scanning Unit (Printer Cover) firmly using both hands, and be careful not to
get your fingers caught.
Do not hold the LCD or the Operation Panel.
Note
If the error message is still displayed after the Scanning Unit (Printer Cover) is closed, see
"Error Message Is Displayed on the LCD" on page 68.
When you start printing after replacing the ink tank, Print Head Cleaning is performed
automatically. Do not perform any other operations until Print Head Cleaning finishes.
50 Routine Maintenance
mark on the ink tank until the
(1)
*1 Make sure the position of the tank
matches the label.
*1
(3) (2)