Page of 112

Canon PIXMA MP600 Quick Start Manual

Canon pixma mp600: quick start.
Also See for PIXMA MP600:
Quick start manual - 36 pages
Start here - 2 pages
Supplementary manual - 6 pages
Photo All-in-One
Quick Start Guide

   Related Manuals for Canon PIXMA MP600

   Summary of Contents for Canon PIXMA MP600

  • Page 1

    Photo All-in-One Quick Start Guide...

  • Page 2

    Telephone Device for the Deaf (TDD) support is available at (1-866-251-3752). 4. Extended Service and Support Canon CarePAK Extended Service Plan is a cost-attractive and easy-to-use extended service program that provides up to three full years of service and support coverage at a very attractive price.

  • Page 3

    Photo All-in-One Quick Start Guide...

  • Page 4

    Canon PIXMA MP600 Photo All-in-One Quick Start Guide. Copyright This manual is copyrighted by Canon U.S.A., Inc. with all rights reserved. Under the copyright laws, this manual may not be reproduced in any form, in whole or in part, without the prior written consent of Canon U.S.A., Inc.

  • Page 5: Table Of Contents

    Table of Contents Before Printing...2 Basic Operation for the Operation Panel ...2 Turning the Machine On and Off ...4 Handling the Original Document...5 Loading Printing Paper ...7 Changing the Paper and Print Settings ...21 Printing from Your Computer...26 Printing with Windows...26 Printing with Macintosh...27 Scanning Images ...28 Scanning Methods ...28...

  • Page 6: Before Printing, Basic Operation For The Operation Panel

    Before Printing Basic Operation for the Operation Panel (A) HOME button (B) Easy-Scroll Wheel (C) OK button Easy-Scroll Wheel Turn the Easy-Scroll Wheel left or right to select the setting item. The selected item is highlighted or surrounded by a frame. You can also use the {, }, [ or ] button to select the setting items.

  • Page 7

    Settings: Easy photo reprint: Memory card: Other Buttons (A) NAVI button (B) Function buttons NAVI Button You can easily reach the function that you want to perform. Select what you want to do on the navigation menu, then press the OK button. Function Buttons Two Function buttons enable you to select menus displayed at the bottom of the LCD.

  • Page 8: Turning The Machine On And Off

    Turning the Machine On and Off Turn on the machine before printing. Turning on the Machine Before turning on the machine, confirm the following. The Print Head and ink tanks are set into place. If you are using the machine connected to a computer, confirm also the following. The machine is connected to your computer (or a compatible device).

  • Page 9: Handling The Original Document

    Handling the Original Document This section describes how to load the original document on the Platen Glass. Original Document Requirements The original documents you load on the Platen Glass for copying or scanning must meet these requirements: Document Paper documents type Photographs Books...

  • Page 10

    Important Do not place any objects weighing more than 4.4 lb / 2 kg on the Platen Glass. Do not press or put weight on the original with pressure exceeding 4.4 lb / 2 kg. Doing so may cause the scanner to malfunction or the Platen Glass to break.

  • Page 11: Loading Printing Paper

    Loading Printing Paper This section describes how to load printing paper in the Auto Sheet Feeder and the Cassette. Paper Handling Recommended Paper and Requirements Media Type Model Plain Paper — Envelopes — High Resolution HR-101N 80 sheets (A4, Letter) Paper Super White SW-201...

  • Page 12

    Paper with a Model Number is Canon specialty media. You may not be able to purchase some Canon genuine papers depending on your country. *1 Paper is not sold in the US by Model Number. Purchase paper by name. *2 Available only when printing from your computer.

  • Page 13

    Folded, curled, or wrinkled paper Damp paper Paper that is too thin (weighing less than 64 gsm / 17 lb) Paper that is too thick (non-Canon genuine paper weighing more than 105 gsm / 28 lb) Picture postcards Postcards affixed with photos or stickers...

  • Page 14

    Using Specialty Media Canon recommends that you use Canon genuine media to ensure optimal print quality. Photo Quality Media Glossy Photo Paper Matte Photo Paper Photo Paper Plus Double Sided Photo Paper Plus Glossy Photo Paper Plus Semi-gloss Photo Paper Pro...

  • Page 15

    When Printing for the First Time At purchase, the machine is set to feed from the Auto Sheet Feeder. If you are printing without changing paper source settings, load paper in the Auto Sheet Feeder. Note For details on loading paper, see “Loading Paper in the Auto Sheet Feeder” on page 16. (A) Load plain paper in the Auto Sheet Feeder.

  • Page 16

    Paper Source Selection Scenarios Deciding on the usage of the two paper sources to print with minimum reloading of paper depends mainly on the variety of the type of paper you use regularly. If you print regularly on photo paper as well as on plain paper If you use photo paper as much as plain paper, you can load photo paper in the Auto Sheet Feeder and plain paper in the Cassette.

  • Page 17

    If you print mainly on plain paper You can load plain paper of the same size in both paper sources, and set the printer driver to automatically switch the paper source when either paper source runs out of paper during printing.

  • Page 18

    Changing the Paper Source Before printing, confirm that the location where you have loaded paper is selected as the paper source. Press the Paper Feed Switch to change the paper source. Important When Printing from Your Computer If Paper Feed Switch is not selected for Paper Source in the printer driver, the Paper Feed Switch on the machine will be disabled when printing.

  • Page 19

    Note For details on the specialty media Canon provides for use with its various printers, refer to “Printing Media” in the User’s Guide on-screen manual. For detailed instructions on how to load specialty media into the machine, refer to “Printing Media”...

  • Page 20

    Loading Paper in the Auto Sheet Feeder Flatten the four corners of the paper before loading it. Note Align the edges of paper neatly before loading. Loading paper without aligning the edges may cause paper jams. If paper is curled, hold the opposing curled corners and gently bend them in the opposite direction until the paper becomes completely flat.

  • Page 21

    Load the paper. (1) Load the paper in the Auto Sheet Feeder with the print side facing UP. (2) Align the paper stack against the Cover Guide on the right side of the Paper Support. Note Make sure that the Cover Guide is set upright when you load paper in the Auto Sheet Feeder.

  • Page 22

    Load the paper with the print side facing DOWN. (1) Load the paper in the Cassette with the print side facing DOWN and the leading edge to the far side. (2) Align the paper stack against the right side of the Cassette.

  • Page 23

    Loading Envelopes Use either European DL or US Comm. Env. #10-sized envelope. Important You need to print from the computer to print on envelopes. Do not use envelopes with embossed or treated surfaces, a double flap, pressure seals, or sticker flaps. Select either DL Env.

  • Page 24

    Loading Envelopes in the Cassette Align the envelope stack against the right side of the Cassette. Load with the front face DOWN. The flap of the envelope will appear facing UP on the left side. A maximum of 5 envelopes can be loaded at once. Slide the Paper Guides against the side of the envelope.

  • Page 25: Changing The Paper And Print Settings

    Changing the Paper and Print Settings This section describes the Settings screen that can be specified on the Operation Panel when copying, or when printing from a memory card or printed photo. Setting Items in Each Mode Items in each mode are as follows. When you select the item to set and press the OK button, a screen with various settings is displayed.

  • Page 26

    Important While Auto is selected, you can not change the intensity by using the Easy-Scroll Wheel. Press the Function button (f2/Switch auto/man) to enable manual intensity settings again and then specify the intensity. See “Function Buttons” on page 3. (3) Select the paper source. Before printing, confirm that the location where you have loaded paper is selected as the paper source.

  • Page 27

    Memory Card and Easy Photo Reprint Modes This section describes the paper and print settings for Memory card and Easy photo reprint modes. Print Settings Confirmation Screen You can specify the paper settings for printing or print quality. Note Paper size, media type, and print quality settings are specified for the paper source selected by the Paper Feed Switch.

  • Page 28

    Advanced Print Settings Screen When you press the Function button (f1/Advanced) in the print settings confirmation screen, the advanced print settings screen is displayed. See “Function Buttons” on page 3. You can optimize photos and advanced print settings with the functions below. Memory card mode Easy photo reprint mode (1) Select bordered or borderless print.

  • Page 29

    (4) Activate/deactivate Red eye correction. Corrects red eyes in portraits caused by flash photography. Red eye correc. OFF, Red eye correc. ON (5) Activate/deactivate Vivid photo function. Makes green and blue more lively. Vivid photo OFF, Vivid photo ON (6) Activate/deactivate the Photo Optimizer pro function. Automatically optimizes brightness and tone of a photo.

  • Page 30: Printing From Your Computer, Printing With Windows

    Create a document or open a file to print using an appropriate application software. Select Print on the application software’s File menu. Make sure that Canon MP600 Printer is selected, and click Preferences (or Properties). Specify the required settings and click OK.

  • Page 31: Printing With Macintosh

    Printing with Macintosh Turn on the machine and load the paper in the machine. See “Turning the Machine On and Off” on page 4 and “Loading Printing Paper” on page 7. Make sure that the proper paper source is selected. See “Changing the Paper Source”...

  • Page 32: Scanning Images, Scanning Methods

    Scanning Images You can scan images from the machine to a computer without printing them and save them in popular file formats, such as JPEG, TIFF, bitmaps, or PDF. If you are scanning printed text, you can use the OCR (Optical Character Recognition) software to convert it to text data. Scanning Methods Scanning Using the MP Navigator Using MP Navigator, you can scan originals loaded on the Platen Glass and view images saved...

  • Page 33: Copying, Making Copies

    Copying Making Copies This section describes the basic procedure to make copies. Turn on the machine. See “Turning the Machine On and Off” on page 4. Select Copy on the HOME screen. See “Basic Operation for the Operation Panel” on page 2. Load paper.

  • Page 34: Using Other Copy Functions

    Using Other Copy Functions Reduced/Enlarged Copy Reduces or enlarges copies. Two-sided copy Copies two original pages onto the sides of a single sheet of paper. Borderless copy Copies color images so that they fill the entire page without borders. 2-on-1 copy Copies two original pages onto a single sheet of paper by reducing each image.

  • Page 35: Printing From A Memory Card, Memory Cards Supported By This Machine

    Printing from a Memory Card Memory Cards Supported by This Machine The following memory cards are compatible with this machine. Memory cards that can be directly inserted into the Card Slot: Memory cards that can be inserted in the Card Slot using the adapter: *1 Requires purchase of a separate compact flash card adapter for xD-Picture cards.

  • Page 36: Inserting The Memory Card

    Inserting the Memory Card Turn on the machine. See “Turning the Machine On and Off” on page 4. Open the Card Slot Cover. Insert one and only one memory card into the Card Slot. Card Type Compact Flash (CF) card Microdrive xD-Picture card* SmartMedia...

  • Page 37: Removing The Memory Card, Printing Photographs Stored On A Memory Card

    Removing the Memory Card Open the Card Slot Cover. Make sure that the Access lamp is not flashing, then remove the memory card. Close the Card Slot Cover. Printing Photographs Stored on a Memory Card Prepare for printing. (1) Turn on the machine. See “Turning the Machine On and Off”...

  • Page 38: Using Other Printing Functions, Using Useful Display Functions

    Layout print Prints photos your pasted in the specified layout. Sticker print Prints your favorite photo with a frame on Canon Photo Stickers. DPOF print Prints according to the Digital Print Order Format (DPOF) settings on your digital camera, if you have specified them.

  • Page 39: Printing Using The Photo Index Sheet

    Printing Using the Photo Index Sheet Turn on the machine, and load A4 or Letter-sized paper. See “Turning the Machine On and Off” on page 4 and “Loading Printing Paper” on page 7. Make sure that the proper paper source is selected. See “Changing the Paper Source”...

  • Page 40: Photo Printing From Photo, Scanning A Photo

    Photo Printing from Photo You can scan photos into and then print them from the machine. Various effects can be applied to the images before printing them. Scanning a Photo Turn on the machine. See “Turning the Machine On and Off” on page 4. Select Easy photo reprint on the HOME screen.

  • Page 41: Printing Scanned Photographs, Other Useful Functions

    The specified number of copies of each photo will be printed. Other Useful Functions Sticker print Prints your favorite photo on Canon Photo Stickers to create your own stickers. Print all photos Prints all scanned photos. Photo Printing from Photo...

  • Page 42: Using Useful Display Functions

    Using Useful Display Functions Change display The display method of a photograph can be changed. Trimming Edits images displayed on the LCD by cropping them. Photo Printing from Photo...

  • Page 43: Printing Photographs Directly From A Compliant Device, Printing From A Pictbridge Compliant Device

    Printing Photographs Directly from a Compliant Device Printing from a PictBridge Compliant Device You can connect a PictBridge compliant device such as a digital camera, camcorder, or mobile phone and print recorded images directly without using a computer. Note PictBridge is an industry standard enabling a range of digital photo solutions, including the direct printing of photos from a digital still camera, camcorder or mobile phone* without the need to use a computer.

  • Page 44

    Connect the PictBridge compliant device to the machine. Note Depending on the model or brand of your device, you may have to select a print mode compliant with PictBridge before connecting the device. You may also have to turn on the device or select Play mode manually after connecting the device to the machine.

  • Page 45

    Default setting explained below is applied for the setting item. * In the following description, names of settings items are given according to those used in Canon-brand PictBridge compliant devices. Setting item names may be different depending on the brand or model of your device.

  • Page 46

    *5 Feeding this paper from the Cassette can damage the machine. Load in the Auto Sheet Feeder. *6 You may not be able to purchase some Canon genuine papers depending on your country. *7 When printing on Photo Paper Plus Semi-gloss 8" x 10" / 203.2 x 254.0 mm (SG-201), select 20 x 25 cm/8"...

  • Page 47

    For details on the setting, see “Confirming or Changing PictBridge Print Settings from Your Camera” on page 41. If you are using a Canon-brand PictBridge compatible device, additional options of VIVID, NR, Face, or Red eye may be available, depending on the model.

  • Page 48

    Confirming or Changing PictBridge Print Settings on the Machine You can confirm and change the print settings such as media type and size that are preset to the machine and applied to PictBridge printing. Displaying the PictBridge Settings Screen and Specifying the Settings (1) Turn on the machine.

  • Page 49

    Contrast Adjust contrast. Color hue Adjust color hue. Effects Applies special effects to the photo, such as printing in sepia tones or with a sketch illustration like effect. Printing Photographs Directly from a Compliant Device...

  • Page 50: Routine Maintenance, Replacing An Ink Tank

    Routine Maintenance Replacing an Ink Tank When ink runs out, replace the ink tank. The machine will not print if the wrong type of ink tank is used, or if it is installed in the incorrect position. The machine uses the following ink tanks. Black: CLI-8BK Black: PGI-5BK Yellow: CLI-8Y...

  • Page 51

    * With this operation, releasing the function for detecting the remaining ink level is memorized. Please be advised that Canon shall not be liable for any malfunction or trouble which may be caused by continuation of printing under the ink out condition.

  • Page 52

    Important Handling Ink To maintain optimal printing quality, we recommend the use of specified Canon brand ink tanks. Refilling ink is not recommended. Once you remove an ink tank, replace it immediately. Do not leave the machine with ink tanks removed.

  • Page 53

    Remove the ink tank whose lamp is flashing fast. (1) Push the tab and remove the ink tank. Important Handle ink tanks carefully to avoid staining clothing or the surrounding area. Discard empty ink tanks according to the local laws and regulations regarding disposal of consumables.

  • Page 54

    Install the ink tank. (1) Insert the front end of the ink tank into the Print Head. (2) Press on the mark on the ink tank until the ink tank snaps firmly into place. (3) Make sure that the ink lamp lights up red. Important The machine cannot be used unless all the ink tanks are installed.

  • Page 55: Keeping The Best Printing Results

    Keeping the Best Printing Results To avoid drying of the Print Head and clogging of the nozzles, note the following. When You Turn Off the Machine Follow the procedure below to turn off the machine. (1) Press the ON/OFF button to turn off the machine. (2) Confirm that the POWER lamp has gone out.

  • Page 56: When Printing Becomes Faint Or Colors Are Incorrect

    See “Print Head Deep Cleaning” on page 58. Note If Print Head Deep Cleaning does not resolve the problem, the Print Head may be damaged. Contact your Canon service representative. If the Ruled Lines Are Shifted Step 1 See “Aligning the Print Head” on page 60.

  • Page 57: Printing The Nozzle Check Pattern

    Printing the Nozzle Check Pattern Print the nozzle check pattern to determine whether the ink ejects properly from the Print Head. Note Make sure that the Inner Cover is closed. Make sure that the machine is turned on, then load a sheet of A4 or Letter-sized plain paper in the Auto Sheet Feeder or the Cassette.

  • Page 58: Examining The Nozzle Check Pattern

    Examining the Nozzle Check Pattern Follow the procedure below to examine the nozzle check pattern, and perform cleaning if necessary. Note If the ink level is low, the nozzle check pattern is not printed correctly. Replace the relevant ink tank. See “Replacing an Ink Tank”...

  • Page 59

    The confirmation screens for white streaks and missing lines are displayed alternately. Select the pattern that is closer to the nozzle check pattern that you printed. If There Are No Missing Lines and No White Streaks (1) Select All A and press the OK button. The LCD returns to the Maintenance screen.

  • Page 60: Print Head Cleaning

    Print Head Cleaning Clean the Print Head if lines are missing or if white streaks appear in the printed nozzle check pattern. Cleaning unclogs the nozzles and restores the print head condition. Note that cleaning the Print Head causes used ink to be absorbed in the ink absorber. Cleaning the Print Head consumes ink, so perform Print Head Cleaning only when necessary.

  • Page 61

    Check the print head condition with the printed nozzle check pattern, and take appropriate action. See “Examining the Nozzle Check Pattern” on page 54. Note If the problem is not resolved after performing steps 4 and 5 twice, try Print Head Deep Cleaning. See “Print Head Deep Cleaning”...

  • Page 62: Print Head Deep Cleaning

    Print Head Deep Cleaning If print quality does not improve by standard Print Head Cleaning, try Print Head Deep Cleaning, which is a more powerful process. Note that cleaning the Print Head causes used ink to be absorbed in the ink absorber. Print Head Deep Cleaning consumes more ink than standard Print Head Cleaning, so perform this procedure only when necessary.

  • Page 63

    (2) If the print head nozzles are still not clean, turn off the machine and perform another Print Head Deep Cleaning after 24 hours. (3) If this does not solve the problem, the Print Head may be damaged. Contact your Canon service representative.

  • Page 64: Aligning The Print Head

    Aligning the Print Head If ruled lines are printed misaligned or print results are otherwise unsatisfactory, adjust the print head position. Note Make sure that the Inner Cover is closed. Automatic Print Head Alignment Note You cannot feed paper from the Cassette when performing Automatic Print Head Alignment. Always load paper in the Auto Sheet Feeder.

  • Page 65

    Manual Print Head Alignment If the results of Automatic Print Head Alignment are not satisfactory, follow the procedure below to perform Manual Print Head Alignment. For details on performing Automatic Print Head Alignment, see “Automatic Print Head Alignment” on page 60. Make sure that the machine is turned on, and then load three sheets of A4 or Letter-sized plain paper in the Auto Sheet Feeder or the Cassette.

  • Page 66

    Look at the printout. From the patterns, select the most even, least irregular patterns for each column and input their numbers. Press the OK button. (1) Select a column to input the pattern number. (2) Use the [ or ] button to input the number of the pattern.

  • Page 67

    Look at the printout. From the patterns, select the most even, least irregular patterns for each column and input their numbers. Press the OK button. In the same way in step 9, input the numbers. Note When you turn off the machine, be sure to press the ON/OFF button on the machine. Otherwise, the settings made here will not be saved.

  • Page 68: Cleaning Your Machine

    Cleaning Your Machine This section describes the cleaning procedure that is needed to maintain your machine. Caution Be sure to turn off the power and disconnect the power cord before cleaning the machine. Do not use tissue paper, paper towels, or similar materials for cleaning. Paper tissue powders or fine threads may remain inside the machine and cause problems such as a blocked Print Head and poor printing results.

  • Page 69

    Repeat step 3 three times. The paper cleans the inside of the machine as it feeds through the machine. If there are no signs of improvement after performing cleaning three times, contact a Canon service representative. Cleaning the Inside of the Machine (Bottom Plate Cleaning) This section describes how to clean the inside of the machine.

  • Page 70

    Load this and only this sheet of paper in the Auto Sheet Feeder with the open side to the front. Perform bottom plate cleaning. (1) Select Settings on the HOME screen. See “Basic Operation for the Operation Panel” on page 2. The Settings screen is displayed.

  • Page 71: Troubleshooting

    Troubleshooting This section describes troubleshooting tips for problems you may encounter when using the machine. Note If you cannot find appropriate tips for your problem, refer to the on-screen manuals. “Error Message Is Displayed on the LCD” on page 68 “LCD Cannot Be Seen At All”...

  • Page 72: Error Message Is Displayed On The Lcd

    5 seconds, and then release it. * With this operation, releasing the function for detecting the remaining ink level is memorized. Please be advised that Canon shall not be liable for any malfunction or trouble which may be caused by continuation of printing under the ink out condition.

  • Page 73

    However, because printing is disabled once the ink absorber becomes completely full and until the ink absorber is replaced, you are recommended to contact a Canon service representative as early as possible. (You will need to replace a particular part of the machine.) Disconnect the cable connecting the machine and the device, and then reconnect it.

  • Page 74: Lcd Cannot Be Seen At All, An Unintended Language Is Displayed On The Lcd

    5 seconds, and then release it. * With this operation, releasing the function for detecting the remaining ink level is memorized. Please be advised that Canon shall not be liable for any machine malfunction or damage caused by refilled ink tanks.

  • Page 75: Cannot Install The Mp Drivers

    Double-click the CD-ROM icon on your desktop to start installation. If the CD-ROM icon is not displayed on the desktop, there may be a problem with the CD-ROM. Contact a Canon service representative. Follow the procedure described in the Easy Setup Instructions for proper installation.

  • Page 76: Cannot Connect To Computer Properly

    If the CD-ROM icon is not displayed, restart your computer. If the icon is still not displayed, try different disks and see if they are displayed. If other disks are displayed, there is a problem with the Setup CD-ROM. Contact a Canon service representative.

  • Page 77: Print Results Not Satisfactory

    Print Results Not Satisfactory Cannot Print to End of Job Cause Size of the print data is extremely large (Windows XP/Windows 2000 only). Part of the Page Is Not Printed Cause Page Size setting in the Operation Panel does not match the actual size of the paper loaded in the machine.

  • Page 78

    If the problem is still not resolved after performing Print Head Deep Cleaning twice The Print Head may be damaged. Contact your Canon service representative. For details on how to print the nozzle check pattern, how to clean the Print Head, and how to perform Print Head Deep Cleaning, see “When Printing...

  • Page 79

    Action When printing data with high color saturation such as photographs or images in deep color, we recommend using Photo Paper Pro or other Canon specialty paper. See “Media Types You Cannot Use” on page 9. Check that the Media Type set in the Operation Panel matches the type of the loaded printing paper.

  • Page 80

    Maintenance sheet, select the Prevent paper abrasion check box, and then click Send. In the Canon IJ Printer Utility, select Custom Settings in the pop-up menu, select the Prevent paper abrasion check box, and then click Send. To open the printer properties dialog box (Windows), refer to “Opening the Printer Properties Dialog Box (Windows)”...

  • Page 81

    Cause Media Type setting in the Operation Panel does not match the actual type of paper. Printing graphics with Intensity setting set too high. Printing beyond the recommended printing area. Colors Are Uneven or Streaked Cause Print quality is not set appropriately. Printing Problems When Copying Cause The original document is not loaded...

  • Page 82: Printing Does Not Start

    Printing Does Not Start Cause Ink tank is empty. Ink tank not installed in proper position. Open the Scanning Unit (Printer Cover) and check the ink lamps. Ink tank is not installed securely. / Part of the orange tape is remaining. Troubleshooting Action Open the Scanning Unit (Printer Cover) and check the ink lamps.

  • Page 83: Paper Does Not Feed Properly

    Cause Unnecessary print jobs are left in queue. / Computer problems. Paper Does Not Feed Properly Cause Printing on inappropriate type of paper. Paper Feed Rollers are dirty. Paper not loaded properly. Paper source selection is inappropriate. Action Restarting your computer may solve the problem. If there are any unnecessary print jobs, follow the procedure below to delete them.

  • Page 84

    Cause Too much plain paper loaded. Foreign object in the Auto Sheet Feeder or Cassette. Envelopes not prepared or loaded properly. Inner Cover is not completely closed. Troubleshooting Action You can load approximately up to 150 sheets of 17 lb / 64 gsm plain paper (0.52 inches / 13 mm in stack height).

  • Page 85: Paper Jams

    If you cannot remove the paper or the paper tears inside the machine, or if the paper jam error continues after removing the paper, contact your Canon service representative. Do not load credit card-sized paper in the landscape orientation.

  • Page 86

    (3)Close the Rear Cover, then turn on the machine. Wait until the jammed paper is automatically ejected. If you cannot remove the jammed paper or the paper jam error continues after removing the paper, contact your Canon service representative.

  • Page 87

    Cause Paper jammed inside the machine at the transport unit. Action Remove the paper following the procedure below. (1)Open the Rear Cover. (2)If you can see the jammed paper, slowly pull the paper out. Be careful not to touch the components inside the machine. If you cannot pull the paper out, turn the machine off and turn it back on.

  • Page 88

    If you cannot remove the paper or if the paper tears inside the machine, or if the paper jam error continues after removing the paper, contact your Canon service representative. Remove the paper following the procedure below.

  • Page 89: Error Message Appears On The Screen

    (3)Open the File menu and select Properties. (4)Click the Ports tab to confirm the port settings. Make sure that a port named USBnnn (Canon MP600 Printer) (where n is a number) is selected for Print to the following port(s). In Windows Me or Windows 98, click the Details tab and make sure that MPUSBPRNnn (Canon MP600 Printer) is selected for Print to the following port.

  • Page 90

    Error Regarding Automatic Duplex Printing Is Displayed Cause The correct media size is not selected in the MP Drivers. Error No.: 300 Is Displayed Cause The machine is not ready. Machine is not connected properly. Your machine is not selected in Printer on the Print dialog box.

  • Page 91

    However, because printing is disabled once the ink absorber becomes completely full and until the ink absorber is replaced, you are recommended to contact a Canon service representative as early as possible. (You will need to replace a particular part of the machine.) Action Close Inner Cover, press the OK button on the machine.

  • Page 92: Camera

    If you are using a non-Canon PictBridge compatible camera and not sure how to dismiss the printer error message from the camera, check the error message displayed on the LCD and dismiss the error message. For details on dismissing an error message from the machine, see “Error Message Is Displayed on the LCD”...

  • Page 93: Cannot Print Properly From A Photo Index Sheet

    5 seconds, and then release it. * With this operation, releasing the function for detecting the remaining ink level is memorized. Please be advised that Canon shall not be liable for any machine malfunction or damage caused by refilled ink tanks.

  • Page 94: Appendix, Reading The On-screen Manuals

    You can view the on-screen manuals in the following way: To view the on-screen manual, double-click the MP600 On-screen Manual shortcut icon on the desktop, or click Start > All Programs (or Programs) > Canon MP600 Manual > MP600 On- screen Manual.

  • Page 95: Specifications

    Specifications Printing resolution (dpi) Print speed* * Based on Canon standard pattern. Print speed may vary depending on system configuration, software, document complexity, print mode and page coverage. Print width Acoustic noise level Operating environment Storage environment Power supply Power consumption...

  • Page 96

    20 x 25 cm / 8" x 10" (Photo Paper Pro) 10.1 x 18 cm / 4" x 7.1" (Photo Paper Pro) *1 Canon-brand sticker. Printing on this paper is available only when the Layout function on your camera has a 16-up option. See “Recommended Paper and Requirements”...

  • Page 97

    *1 Conform to the operating system’s requirement when it is higher than this. For updated compatibility, visit our website. *2 Operation can only be guaranteed on a computer with built-in USB or USB 2.0 Hi-Speed port and pre-installed Windows XP, 2000, Me, 98, or Mac OS X v.10.2.8 - v.10.4. *3 Including compatible processors.

  • Page 98: Safety Precautions

    Safety Precautions Please read the safety warnings and cautions provided in this manual to ensure that you use the machine safely. Do not attempt to use the machine in any way not described in this manual. Warning This product emits low level magnetic flux. If you use a cardiac pacemaker and feel abnormalities, please move away from this product and consult your doctor.

  • Page 99

    Cleaning the machine Use a damp cloth to clean the machine. Never use flammable solvents such as alcohol, benzene or thinners. If flammable solvents come in contact with electrical components inside the machine, it could cause a fire or electric shock. Always unplug the machine from the power outlet before cleaning the machine.

  • Page 100

    Power supply Ensure that the area around the power outlet is kept clear at all times so you can easily unplug the power cord if necessary. Never remove the plug by pulling on the cord. Do not use an extension lead/cord. Never use a power supply source other than the one rated for the machine in the country of where you purchased the machine.

  • Page 101: Legal Limitations On Use Of Your Product And Use Of Images

    Legal Limitations on Use of Your Product and Use of Images It may be unlawful to make copies of, scan, print, or use reproductions of the following documents. The list provided is non-exhaustive. When in doubt, check with a legal representative in your jurisdiction.

  • Page 102: Users In The U.s.a

    1-516-328-5600 Canon U.S.A., INC. LIMITED WARRANTY --- (USA Only) The limited warranty set forth below is given by Canon U.S.A., Inc. ("Canon USA") with respect to the new or refurbished Canon-brand product ("Product") packaged with this limited warranty, when purchased and used in the United States only.

  • Page 103

    Separate Warranty. Non-Canon brand equipment and software that may be distributed with the Product are sold "as is" and without warranty of any kind by Canon USA, including any implied warranty regarding merchantability or fitness for a particular purpose, and all such warranties are disclaimed.

  • Page 104

    ASF(s) near you may be obtained from Canon USA's Web site at www.canontechsupport.com or by calling the Canon USA Customer Care Center at 1-800-828-4040, or any time while speaking to a technical support person. A Product covered by this limited warranty will be repaired or exchanged, as determined by Canon USA, and returned without charge by the ASF.

  • Page 105

    Canon U.S.A., Inc. One Canon Plaza Lake Success, NY 11042 ©2006 Canon U.S.A., Inc. Canon is a registered trademark of Canon Inc. in the United States and may also be a registered trademark in other countries. Safety Precautions...

  • Page 106: Index

    Specialty Media 10 Specifications copy 91 general 91 PictBridge 92 scan 91 System Requirements 92 Troubleshooting 67 Turning off the Machine 4 Turning on the Machine 4 Users in the U.S.A. Canon U.S.A., Inc. Limited Warranty - U.S. Only 98...

  • Page 107

    Index...

  • Page 108

    Index...

  • Page 109

    Index...

  • Page 110

    This product uses the following copyrighted software: exit.c Copyright © 1990 The Regents of the University of California. All rights reserved. Redistribution and use in source and binary forms are permitted provided that the above copyright notice and this paragraph are duplicated in all such forms and that any documentation, advertising materials, and other materials related to such distribution and use acknowledge that the software was developed by the University of California, Berkeley.

  • Page 111

    © 2006 Canon U.S.A., Inc. Canon is a registered trademark of Canon Inc. in the United States and may be a registered trademark or trademarks in other countries. All other product and brand names are trademarks of their respective owners. As an ENERGY STAR partner, Canon U.S.A., Inc.

  • Page 112

    The following ink tanks are compatible with this product. QT5-0684-V02 XXXXXXXX ©CANON INC.2006 PRINTED IN THAILAND...

Comments to this Manuals

Symbols: 0
Latest comments:
  • john roberts Jul 31, 2014 05:10:
    My MP600 states " The type of print head is incorrect. Install the correct print head."​;

    The printer has worked for ages with the original print head. Why would it suddenly reject the original print head?

    Bec​ause of this message none of the features work.

    Wou​ld appreciate help as I am not technical.​

    Regards
    ​John Roberts
  • no name Jun 23, 2014 06:09:
    It doesn't show up. All it says is "The type of printer head is incorrect. Install the correct print head."​;​; My printer head is the original print head so it shouldn't be saying that. Also it wont go off of the "The type of printer head is incorrect. Install the correct print head."​;​;
  • No name Jun 23, 2014 05:32:
    It doesn't show up. All it says is "The type of printer head is incorrect. Install the correct print head."​; My printer head is the original print head so it shouldn't be saying that. Also it wont go off of the "The type of printer head is incorrect. Install the correct print head."​;