Onkyo TX-NR5100 Instruction Manual page 81

Playing music files saved on a USB storage device
Perform the following procedure when this unit is on.
1. Switch the input on the TV to the input connected to the unit.
2. Plug your USB storage device with the music files into the USB port on the
rear panel of this unit.
3. Press NET to display the network service list screen.
4. Select "USB" with the cursors, and then press ENTER.
• If the "USB" indicator blinks on the display, check whether the USB storage
device is plugged in properly.
• Do not unplug the USB storage device while "Connecting..." is being
displayed on the display. This may cause data corruption or malfunction.
5. Press ENTER on the next screen again. The list of folders and music files on
the USB storage device is displayed. Select the folder with the cursors, and
press ENTER to confirm your selection.
6. Select the music file with the cursors, and then press ENTER to start
playback.
NET
ENTER
• To return to the previous screen, press
• Characters that cannot be displayed on this unit appear with "".
• The USB port of this unit complies with the USB 2.0 standard. The transfer
speed may be insufficient for some content you play, and sound interruptions,
etc. may occur.
Playback
/ / /
.
81