Onkyo TX-NR5100 Instruction Manual page 12

Display
1 2
7
1. Speaker/Channel display: Displays the output
channel that corresponds to the selected
listening mode.
2. Lights in the following conditions.
: Headphones are connected.
: Connected by BLUETOOTH.
: Connected by Wi-Fi.
NET: Lights when connected to the network with
the "NET" input selector. It will blink if incorrectly
connected to the network.
3 4
6
USB: Lights when the "NET" input selector is
selected, a USB device is connected and the
USB input is selected. It will blink if the USB
device is not properly connected.
HDMI: HDMI signals are input and the HDMI
input is selected.
DIGITAL: Digital signals are input and the digital
input is selected.
A: Audio is output only to ZONE A.
B: Audio is output only to ZONE B.
AB: Audio is output to both ZONE A and ZONE
B.
3. Lights according to the type of input digital audio
signal and the listening mode.
4. Lights in the following conditions.
TUNED: Receiving AM/FM radio.
FM ST: Receiving FM stereo.
SLEEP: Sleep timer is set.
5
AUTO STBY: Auto Standby is set. ( →p112)
5. Blinks when muting is on.
6. Displays various information of the input signals.
7. Cursors ( / /
performing operations while "NET" is selected
with the input selector.
multiple folders or files that are available to be
selected. / light when text information does
not fit with the range provided by "6".
7
/ ): These may light when
/ light when there are
12