Onkyo TX-NR5100 Instruction Manual page 102

3. Audio Adjust
„ 3. DTS
Change the setting of when DTS signals are input.
‰ DTS Auto Surround (Default Value: On)
When inputting DTS signals that include extended channel information, the
optimum listening mode is automatically selected according to the extended
information contained in the input signal and the speaker configuration of this
unit when playing in the straight decoding listening mode.
On When this function is used
Off Audio is played using the same amount of channels in the
input signal according to the speaker configuration of this unit.
• If this function is set to "Off", the ES Matrix and ES Discrete
listening modes cannot be selected.
‰ Dialog Control (Default Value: 0 dB)
You can increase the volume of dialog portion of the audio up to 6 dB by 1 dB
step so that you can hear the dialog easily in noisy atmosphere.
• This cannot be set for content other than DTS:X.
• Depending on the content, this function may not be selected.
„ 4. LFE Level
Set the low-frequency effect (LFE) level for Dolby Digital series, DTS series,
Multichannel PCM, and DSD signals.
‰ LFE Level (Default Value: 0 dB)
Select the low-frequency effect (LFE) level of each signal from "0 dB" to "-∞
dB". If the low-frequency effect sound is too strong, select "-20 dB" or "-∞ dB".
„ 5. Volume
Change the Volume settings.
‰ Mute Level (Default Value: -∞ dB)
Set the volume lowered from the listening volume when muting is on. Select a
value from "-∞ dB", "-40 dB", and "-20 dB".
‰ Maximum Volume (Default Value: Off)
Set the maximum value to prevent the volume from becoming too loud. Select
a value from "Off", and "50" to "99".
‰ Power On Volume (Default Value: Last)
Set the volume level of when the power is turned on. Select a value from "Last"
(Volume level before entering standby mode), "Min", "0.5" to "99.5" and "Max".
• You cannot set a higher value than that of "Maximum Volume".
‰ Headphone Level (Default Value: 0.0 dB)
Adjust the output level of headphones. Select a value between "-12.0 dB" and
"+12.0 dB".
Setup Setup
102