Napoleon Vector Series Owner's Manual page 24

maintenance
EN
Fully extend the two GGA-1 slider brackets of the appliance outward (Fig. 5).
5.
Carefully hook GGA-1 onto GGA-1 slider brackets by aligning the horizontal tabs on the GGA-1 with the
6.
horizontal slots in the bottom of the GGA-1 slider brackets and moving the GGA-1 back into the GGA-
1 slider brackets (A). Ensure both top and bottom tabs of the GGA-1 engage with hooks of the GGA-1
slider brackets (B) (Fig 5).
Install 2 vertical adjustment screws underflush of GGA-1 slider bracket surface (C) (Fig. 6).
7.
B
24
W415-2036 / D / 08.05.21
A
C
Bottom Hook
Heat Rail
(with Gasket)
GGA-1 slider bracket
Fig. 6
A
B
Fig. 5