Receiving Faxes; Receiving Methods; Setting The Receive Mode - Canon MultiPASS F60 Comprehensive Manual

Chapter
9

Receiving faxes

Receiving methods

Before using your machine to receive faxes, you need to set the mode according to how you
plan to use your machine.
• For receiving both faxes and voice calls: Select <FAX/TEL AUTO SW> (
• For receiving faxes only: Select <FAX ONLY MODE> (
• If you have subscribed to a DRP (Distinctive Ring Pattern) service offered by some
telephone companies: Select <DRPD> (
• For receiving mainly voice calls and sometimes faxes: Select <MANUAL MODE>
( p. 9-4) or <FAX/TEL AUTO SW> (
• For receiving faxes and voice messages on an answering machine: Select <ANS.
MACHINE MODE> (
• For receiving faxes directly to your computer: Refer to the Software Guide.
To check which receive mode is set, press [Fax]. The receive mode appears on the bottom left
of the LCD.
Ex:
1 2 / 2 7 / 2 0 0 2 F R I 1 5 : 3 0
F a x T e l

Setting the receive mode

Follow this procedure to set the receive mode:
1
Press [Fax].
2
Press [Menu].
3
Press [Set].
Ex:
R E C E I V E M O D E
4
Use [2] or [3] to select the receive mode:
• For details on the different modes, see above.
5
Press [Set].
Chapter 9
p. 9-5).
S T A N D A R D
F A X / T E L A U T O S W
p. 9-3).
p. 9-5).
p. 9-2).
p. 9-2).
Receiving faxes
9-1