Copying Problems - Canon MultiPASS F60 Comprehensive Manual

Copying problems

See below if you are having problems copying.
For printing-related problems, see the items marked with
your computer, p. 12-3.
Cannot make a copy (the document or paper will not feed into the machine).
1. Is there anything displayed in the LCD?
If nothing is displayed, see p. 12-14.
2. Is the Alarm light blinking?
If it is blinking, see p. 12-17.
3. Is the document loaded correctly?
Check that the document is loaded correctly on the platen glass or
4. See Paper does not feed properly on p. 12-4.
5. Print the nozzle check pattern (
Paper comes out but there is nothing copied on it.
1. Is the document loaded the right way up?
If placing the document on the platen glass, the side to be copied should be face down.
placing the document in the ADF, the side to be copied should be face up.
2. Print the nozzle check pattern (
Copy quality is poor.
1. Clean the platen glass and document cover (
2. Does the LCD show the correct type of print media loaded?
If not, set the print media type (
3. Is the image quality displayed in the LCD suitable for the document?
If not, set an image quality suitable for the document (
1 0 0 % L T R
P L A I N
Chapter 12
Maintaining the printhead, p. 11-6).
Maintaining the printhead, p. 11-6).
p. 3-6).
Image quality
T E X T
Paper type
P in Problems printing from
Fax Model
p. 11-1).
p. 5-2).
Troubleshooting
ADF ( p. 2-2).
Fax Model If
12-7