Canon MultiPASS C50 Software User's Manual page 91

To create a custom scan resolution:
1. In the Scan Resolution list box, select Custom.
2. In the Custom Resolutions dialog box, in the Name box, type a name
for your custom resolution setting.
3. In the Resolution box, enter the preferred dpi setting.
4. Click Add. The new resolution name displays in the resolution list.
5. Click OK to add the resolution setting. Click Cancel to close the dialog
box without adding the custom resolution.
Deleting a Custom Resolution
When you no longer need to use a custom resolution, you can delete it from
the list. You cannot remove or replace the preset resolution settings.
To delete a custom resolution:
1. In the Scan Resolution list box, select Custom.
2. In the Custom Resolutions dialog box, in the Name box, select the
custom resolution setting you want to delete.
3. Click Remove.
4. Click OK to remove the resolution setting. Click Cancel to close the
dialog box without removing the custom resolution setting.
6-8 Scanning Chapter 6