Installing In Windows; Overwriting The C50 Options - Canon MultiPASS C50 Software User's Manual

n
If you are attempting to reinstall the Desktop Manager software, you must
first uninstall your current installation of the software. For instructions on
uninstalling the software, refer to Chapter 8, "C50 Setup and Other
Utilities in the Desktop Manager."

Installing in Windows

This section provides instructions for installing the C50 printer driver and
Desktop Manager in Windows 95 or Windows 98. The system connects
the printer driver to the appropriate printer port during installation (for
example, LPT1 or LPT2). You can later change the connection if
necessary.
To install the Desktop Manager:
1. Insert the installation disk into your disk drive.
2. Follow the on-screen installation instructions.
For information about allowing the Desktop Manager software to
overwrite the C50 setup options, refer to the "Overwriting the C50
Options" section.

Overwriting the C50 Options

If you set up options on the operation panel of your C50 (such as speed
dial assignments), these options will be overwritten by the Desktop
Manager software:
When the installation of the Desktop Manager software is completed
and you choose to launch the MultiPASS Background
After installation, whenever you open the MultiPASS Background
(which occurs whenever you start Windows or the Desktop Manager)
After installation, when you save a change to the setup options in the
Desktop Manager (as described in Chapter 8, "C50 Setup and Other
Utilities in the Desktop Manager").
2-4 Installing the Desktop Manager Software Chapter 2