Scanning From An Application - Canon Color imageCLASS MF8170c Software Manual

Scanning from an Application

With the WIA driver dialog box open, follow the procedure below.
To display the WIA driver, see "Scanning an Image from an Application," on p. 3-15.
NOTE
If white lines appear on one edge of the scanned image, check that the document is
correctly placed on the platen glass. A document should be placed approximately
mm) from the front edge (i.e., the edge closest to the operation panel) of the platen glass.
3
1
Select the type of picture you want to scan.
You can select from the following:
- [Color picture]
- [Grayscale picture]
- [Black and white picture or text]
- [Custom Settings]
2
Select the paper source ([Flatbed] or [Document Feeder]).
NOTE
If you selected [Document Feeder], select paper size from [Page size] and proceed to
step 4.
3-50
Scanning with the WIA Driver (Windows XP Only)
1
/ " (3
8