Install Printer Driver - Canon imageCLASS D660 Setup Instructions

6

INSTALL PRINTER DRIVER

Windows 95/98/Me
A
Make sure the computer is turned off.
Make sure the power cord of the machine is plugged into the power outlet
B
and the machine is connected to your computer using parallel cable
(cable not included).
Turn on the computer. Start up Windows. PLUG and PLAY is being
C
carried out and the FOUND NEW HARDWARE WIZARD (In Windows 95,
New Hardware or Device Wizard) dialog box appears. Click CANCEL.
D
Set the CD-ROM into the CD-ROM drive of your computer.
E
Click Canon D600
INSTALL button.
Add Printer Wizard
dialog box appears.
G
Select LOCAL
PRINTER, then
click NEXT.
Add Printer
Wizard dialog box
(Manufacturers/printers)
selection appears.
I
Use BROWSE... to
select the directory that
contains the CAPT.
For example, if you are
using the CD-ROM to
install the CAPT on
Windows 95/98, and
your CD-ROM drive is
drive D:, browse to
D:\English\Win9x, and
click OK.
K
Select the printer
port, the machine is
connected to
(usually LPT1:),
then click NEXT.
Add Printer Wizard
dialog box (Printer
name) appears.
If you select a port,
other than the port
D600 is connected to,
COM: or FILE: port,
the machine
will not print.
(CAPT)
F
Click NEXT.
Add Printer
Wizard dialog
box (Local printer/
Network printer)
selection appears.
H
Click
HAVE DISK... in the
MANUFACTURERS/
PRINTERS dialog box.
The Install From Disk
dialog box appears.
J
Driver file
selection dialog
appears.
Click NEXT.
Printer port
selection dialog
box appears.
L
Click FINISH.
If you wish to
change printer
name, type a
new name into the
text box.
When the
M
installation is
complete, the
following dialog
box appears.
To close the dialog
box, click OK.