Usb Cable - Canon imageCLASS D660 Setup Instructions

NOTE: For Windows 2000/NT 4.0 - see Printer Guide on CD-ROM

USB CABLE

INSTALLING FROM CD-ROM MENU
1) Make sure the computer is turned off.
2) Make sure the power cord of the machine is plugged into the power outlet and the machine is connected to your computer
(cable not included).
3) Turn on the computer and ADD NEW HARDWARE WIZARD dialog box appears. Follow the instructions on screen to carry out
PLUG and PLAY installation. When you are asked to select the directory that contains the CAPT, browse to D:\English\Win9x or
D:\English\WinME, if your CD-ROM drive is drive D. For installation instructions using PLUG and PLAY for USB Port, ----> Printer Guide.
INSTALLING FROM CD-ROM MENU
1) Make sure the computer is turned off.
2) Make sure the power cord of the machine is plugged into the power outlet and the machine is connected to your computer,
then turn on the computer.
3) As the USB class driver is automatically detected, perform the same steps as described for "Installing from CD-ROM Menu
(Windows 2000)" of "Parallel Cable Users" (--->pp.25-30). When you are asked to select the printer port, select either USBPRNXX
or USBXXX (XX or XXX represents a set of numbers).
For installation instructions using PLUG and PLAY or ADD PRINTER WIZARD for USB Port, refer to the Printer Guide.
L
If this printer is
shared with other
computers, check on
SHARED option.
Click NEXT.
You can also modify
setting of this option
after the installation,
using Sharing tab from
the Printer Properties.
N
Click FINISH.
Click Yes if the Digital
Signature Not Found
dialog box appears.
- Windows 98/Me/2000/XP
O
When installation is complete, the following dialog
box appears. Click OK.
P
If you opted to print a test page, the test page is printed
after the installation has been completed. If the test
page printed correctly, click YES.
(Windows 98/Me)
(Windows 2000/XP)
M
Click NEXT.
Click YES if you
want to print a
test page, or
NO if you do
not want to print
a test page.