Brother P-touch QL-650TD Setup & Operation Manual page 61

Error message
Printing is operated without
setting DK Roll or without setting
Please Insert
*****! the DK Roll of proper size.
List Print is applicable for 2-3/7"
Please Insert
2-3/7"! (62 mm) amorphous length roll.
When selecting the template
which does not include the date
No Setting
and time object, it is not possible
Applicable Data!
to set addition or subtraction of
date and time.
When selecting the template
which does not include the
No Numbering
Applicable Data! numbering object, the numbering
printing cannot be operated.
Some receiving error occurs
when receiving the data from PC.
Transmission
Error!
The selected template does not
No Editing
include the items which are
Applicable Data!
possible to change their settings.
The data which is about to print
Length Limit!
does not fit to the label size.
Cause Solution
Set the DK Roll which size fits to
the paper size of downloaded
template or label layout on PC to
be printed.
Set 2-3/7" (62 mm) DK Tape.
Select the template which
includes date and time object
and then set it.
Select the template which
includes the numbering object.
Check that the cable is properly
connected and turn on the power
of main unit and do the operation
over again.
Unable to change the settings.
Select bigger label size or modify
its contents and settings.
61
STEP
1
STEP
2
STEP
3
STEP
4