Installing the Software
Installing the software contained on the PowerShot Solution CD-ROM is the first procedure
to complete before you can start loading images onto your computer.
Computer System Requirements
Your computer system must satisfy the following requirements to operate the
bundled software.
Operating System: Windows 95, Windows 98 or Windows NT 4.0
CPU:
RAM:
Free Disk Space:
Ports:
Monitor:
Sound Card:
• CD-ROM Drive is required for software installation.
• QuickTime Version 3.0 or later is required to save PhotoStitch images in
Installation Procedures
The following programs can be installed from the PowerShot Solution CD-ROM.
• TWAIN Driver 2.3
Install this program if you intend to use PhotoImpact, ZoomBrowser or
other TWAIN-compliant application programs to load images from the
camera.
• Slide Show Maker 1.2
• TimeTunnel 2.3
10
486DX2/66 MHz or higher (Pentium recommended)
24 MB or more (32 MB or more recommended)
32 MB or more recommended for Windows NT
TWAIN Driver 2.3:
ZoomBrowser 1.1:
SlideShow Maker 1.2:
TimeTunnel 2.3:
PhotoStitch 2.2:
PhotoImpact 4.0:
Standard RS-232C interface (PowerShot Pro70)
D-SUB 9-PIN connector
640 x 480 pixels, 256 colors or more
(1,024 x 768 pixels, 32,000 colors or more recommended)
Required to play sound annotations
QuickTime VR format.
15 MB or more
30 MB or more
20 MB or more
30MB or more
40 MB or more
130 MB or more