Table of Contents
Advertisement
A window enabling you to select between CF cards will display if there are two CF
cards installed in the camera. After you have selected a CF card slot, the thumbnails
of the images on that card will display. To change the selection, press the [Camera]
button and select the other CF card.
9. Click the thumbnail of the image you wish to load.
The clicked thumbnail will become selected, which is indicated by the pale
gray frame around the image.
• To select multiple images, press and hold the [Ctrl] key while clicking successive
images.
• To select consecutive images, click the first image, then press and hold the [Shift]
key while clicking the last image in the series.
10. Click the [Acquire] button.
The selected image(s) will load into PhotoImpact.
11. Click the [Exit] button.
The PhotoImpact window will display the image(s). Use PhotoImpact's [Save]
command under the [File] menu to save the images to disk.
For instructions regarding the steps after loading images, refer to the user's
manual for PhotoImpact.
17
Advertisement
Table of Contents
