3.3 Before Starting Electrical Adjustments
3.3.1
TWAIN Driver Installation
Install the USB Driver for Adjustment in the CD-ROM to PC.
("This Adjustment Software" is impossible when the RS-232C TWAIN driver is used.)
3.3.2
Installing the Adjustment Software
1. Double click the icon on the launcher screen or a file in the CD-ROM. (Model name of the camera
that you are going to adjust and the name of the adjustment software are different.)
G2
Camera Type
Destination
of Serial No.
USA/Canada
Europe/
OTH (Asia/Oceania)
2. When the dialog box below appears, click the "OK" button.
Third place
Icon
2
G2_USA_Adj.
3 or 4
G2_EUROTH_Adj.
3-45
CHAPTER 3. REPAIR INSTRUCTION
Adjustment Software
File Path
\Adjust\USA\Setup.exe
\Adjust\EuropeOTH\Setup.exe