Table of Contents
Advertisement
6. Click the [Camera Communication Settings] button.
• Confirm that PowerShot Pro70 is displayed in the Select Camera Model box. If it is
not, click the box's arrow and select [PowerShot Pro70] from the list.
• Please refer to page 18 for a guide to the TWAIN Driver window.
The Communication Settings dialog will display.
7. Set the port and baud rate settings and click the [OK] button.
This will set the communication settings for the camera. You can skip steps 6
and 7 the next time you load images from the camera.
8. Click the [Camera] button.
The thumbnails of the images on the camera's CF card will display.
16
Select the port to which the camera is attached.
Click this button to automatically detect the
port to which the camera is attached.
Set the baud rate to match your computer's
capabilities.
Camera Communications
Settings Button
Select Camera Model Box
Advertisement
Table of Contents
