Technical Description - Nortel Meridian 1 Manual

Page 6 of 44 NT5K93 Central office trunk circuit card
Table 3
LD 14 Route Data Block

Technical description

Power requirements
Supplement to 553-3011-210
Prompt Response
REQ NEW
TYPE COT
TN CC UU
XTRK XCOT
(see note)
CDEN (8D)
SIGL LOP
CLS SHL, (LOL)
DTN, (DIP)
BAT, (XBAT)
Note: This prompt is required only for the first unit defined on each
NT5K18BA card.
Table 4 provides the power requirements for the NT5K18BA Central office
trunk card.
Provisional 1.3
Comments
Define a new trunk unit
Central Office Trunk
Terminal number of the unit in Op-
tion 11 format:
Card number, Unit number
Type is IPE COT
Card density is 8D (default)
Loop Start signalling
Attenuation Pads In, (Out)
Digitone signalling, (Digipulse)
Battery supervision enabled, (dis-
abled)
July 1993