Nortel Meridian 1 Manual page 22

Page 18 of 44 E&M tie trunk circuit card
Trunk configuration
Supplement to 553-3011-210
Route Data Block
Each trunk unit on the NT5K19BA E&M trunk card is attached to a route
with an associated route data block. The route data block is configured in LD
16.
Note: All prompts are defaulted except for those noted in Table 4.
Table 11
LD 16 Route Data Block
Prompt Response
REQ NEW
TYPE RDB
CUST 0-99
ROUT 0-127
TKTP TIE, (RAN),
(PAG)
ICOG IAO
ACOD XX
Trunk Data Block
Use overlay 14 to configure each of the trunk units on the NT5K19BA E&M
trunk card.
Provisional 1.3
Comments
Define a new Route Data Block
Enter customer number
Enter route number
Trunk type is either tie, (recorded
announcement), or (paging)
Incoming and outgoing trunk
XX=the trunk route access code
July 1993