Capture Settings; Video; Record Video - Fluke TiS55+ User Manual

Capture Settings

Video

You can record video with and without audio. See
complexity of the recorded data affects the amount of time available to record a video.
Record Video Only
Record Video/Audio
Video File Fomat

Record Video

To quickly record a video, push and hold the primary trigger for 2 seconds. Release the
button once the recording starts.
To record:
1. Select
2. Push the primary trigger.
3. The Imager starts the recording.
4. To pause the recording, push the primary trigger.
5. To restart the recording, push the primary trigger again.
6. To save the video, push
7. To delete the video, push
1.800.561.8187
Option
IS3
AVI
s
> Capture Settings > Record Video only OR Record Video/Audio.
s
d
www.
Table
Table 16. Video
Start a video recording when the primary trigger is
pressed. See Record
Requires a Bluetooth headset. Starts a video recording
with audio. See Record
Save videos as an .is3 file with radiometric video capture.
Choose the .is3 video format when video modification and
maximum resolution is needed.
To edit the .is3 video file, use SmartView software or the
Fluke Connect app.
Save videos as an .avi file with .mpeg encoding.
Choose the .avi video format when video modification is
not required. The file retains the video settings at the time
the video was captured and saved.
.
and then tap Delete.
.com
Thermal Imager
16. The thermal scene and
Description
Video.
Video.
information@itm.com
Settings Menu
33