Unit Configuration; Advanced Settings; List Of Advanced Configuration Settings - Panasonic FP7 User Manual

Chapter 6

6.1 Advanced settings

P r o c e d u r e

6.2 List of advanced configuration settings

FP7 Analog Output Unit User's Manual
After the unit has been entered in the I/O map, it can be configured in
Control FPWIN Pro.
1. Open project
2. Double-click "PLC" in the navigator
3. Double-click "I/O map and unit configuration"
4. Double-click the desired slot number
5. [Advanced]
6. Make the desired settings
7. [OK]
The settings will become effective when the project is downloaded to
the PLC.
Group Item name
Channel 0– Analog output
Channel 3 processing
(settings per
Range setting
channel)
Analog output
in PROG mode
Digital input
value in PROG
mode
Offset/gain
processing
Offset value

Unit configuration

Data
Disable/Enable
-10...+10V/0...+10V/
0...+5V/+1...+5V/
0...+20mA/+4...+20mA
Stop output/Hold current
value/Hold user-defined value
-10...+10V: -32500 to
+32500
0...+10V/0...+5V/0...+20mA:
0 to +32500
+1...+5V/+4...+20mA: 0 to
+25000
Disable/Enable
-3000 to +3000
Unit configuration
Default setting
Enable
-10...+10V
Stop output
0
Disable
0
29