All manuals and user guides at all-guides.com
Q74A Service Manual
FACTORY SET
OSD Menu => Misc => Recall => Yes.
Every value changes factory setting value.
After factory set executes, power OFF
power ON automatically.
You must push the "AUTO" button because of optimum image quality automatically.
When user want factory setting value, you must execute this function.
BURN-IN MODE
If you push the down button more than 5 seconds in disconnected signal cable status, you can see changed
color.
Burn-In mode displays chaged color continually. (white, red, blue, green etc.)
We can check normal operating status of the monitor under mass production.
If you want to finish Burn-In mode, you can turn off the power by only push the power button.
-12-