Page 1
Q7T3(AUO panel) LCD Monitor Service Guide Trouble Shooting Q7T3 TROUBLE SHOOTING GUIDE No Display or display is unstable: Interface Board: No picture or picture unstable Power off Turn on power Does cable plugs in Check all of wire then turn on power connector? switch again.
Page 2
Q7T3(AUO Panel) LCD Monitor Service Guide Trouble Shooting 2. BUTTON function: 2.1 Control Board OSD is not working Is control BD connecting? Plug control BD then retry Is bottom switch normally? Replace control BD then retry Replace Control BD Is OSD working?? Check Interface BD 3.
Page 3
Q7T3(AUO Panel) LCD Monitor Service Guide Trouble Shooting 4. Power Board Backlight didn't shine Replace Q761 IC751 PIN 9 IS 15V? LED shined? Plug CN701 again or PWM existed? 3.3V existed? IS I/F board connected? checking I/F BD (BLT_ADJ) Replace new fuse...