Doesn't Display On Lcd - BenQ Q74A Service Manual

All manuals and user guides at all-guides.com

▶ Doesn't display on LCD

"VIDEO MODE NOT
SUPPORTED" message
"No signal" message
If PC keeps DPMS status
Continually
(No signal Input,
LED color amber)
Doesn't display on screen
Correctly include OSD menu
Doesn't display on screen
Correctly except OSD menu
Noise in vertical pattern.
Display position error
Q74A Service Manual
[Windows]
Reboot safe mode. (press the F8 key during booting).
Remove GraphicCard Driver.
Reboot normal mode.
Reinstall GraphicCard Driver.
Check the signal cable.
Check DPMS mode in PC.
Check pins of the signal cable.
Check the signal cable.
Check pins of the signal cable.
Check HS_VGA and VS_VGA in schematics.
Check scaler output signal.
Check panel harness between panel and AD B/D.
Check solder status of the scaler.
Check the signal cable.
Check scaler input signal (RGB,H-SYNC,V-SYNC)
Execute Auto Adjust.
According to graphic card.
Check 60Hz vertical frequency in display properties.
Execute Auto Adjust
Display position error occurred on dark or moving
picture.(like game)
In this case, you must execute Auto Config in windows
screen.
-16-