D Igital Call Station Etcs - Operation - Honeywell ETCS Operation Instruction Manual

2

D igital call station ETCS - Operation

1 B
ETCS offers a 7" / 17,78 cm touch screen for display and operation which provides a user-friendly interface. The
LED are used for status indications which include microphone fault, system fault and connection states of two
redundant cables. A red button with cover can be configured for emergency announcement. The gooseneck
microphone is replaceable and monitored by ETCS. The loudspeaker can be used for pre-listening audio files
locally and intercom between the call stations.
The ETCS is designed for a redundant cable connection to an Ethernet network and possesses an external audio
input and output for the connection of audio devices such as CD players etc. Up to three DKM plus digital key
modules can be connected.
The ETCS broadcasts audio files to various network users via Ethernet connections. Recorded audio files can be
transmitted to selected zones or network devices by means of the touch screen. This allows time-critical messages
to be delivered to selected message groups.
Fig. 1: Digital call station (ETCS) with optional DKM plus key module for redundant call stations
Microphone

The gooseneck microphone is constantly evaluated acoustically for proper function.
To ensure vocal clarity, maintain a speaking distance of approx. 10 cm from microphone.
Alarm key with cover

A Freely programmable button with a VA messages (broadcast) function. Before using the key, you are
required to log in to the device and the "VA broadcast interface" (see Chap. 3.6.5).
The alarm button is provided with a cover to protect against unintentional operation. To activate the
manual alarm mode, lift the protective cover and then press the button.
Functions of the integrated LED:
Off: Function inactive
Permanently lit red  function active (e.g. running an announcement)
Flashing quickly (0,2 sec. on and 0,2 sec. off)  Function not possible (occupied)
Flashing slowly (0,6 sec. on and 0,6 sec. off)  Partially connected
Different long flashes (on and off)  Pre-signal mode
LED lits
FB 798685.GB0 / 03.20
If a DKM plus is connected to the ETCS, the DKM plus can only be used after logging
into the device (see above).
LED flashes
Ethernet Touch Call Station (ETCS)
LED off
5