Honeywell ETCS Operation Instruction Manual page 33

Fig. 34: "About" page
Station Name:
User Name:
System number:
IP Address:
VLAN
Auto Lock:
Date and Time:
Language:
Backlight:
DKM plus:
Local Storage:
Upload Master:
MAC address:
About:
IP Address, Auto Lock time for the screen, Date & Time for the device, Language and Backlight can be changed
on the Settings page. All changes will take effect immediately.
• Only the root and poweruser can change the "IP Address", "Date & Time", "Language", and
"Region" of the device.
• The screen lock of the ETCS can be set individually for each user e.g. can set its own time span
until the screen lock occurs.
• The default IP address for the ETCS is 192.168.1.127.
FB 798685.GB0 / 03.20
Name of ETCS
Currently logged in user
The ETCS Node ID – this ID should be unique on the network.
The IP address, subnet mask, and gateway of the device. The IP and the gateway
should be in the same range. If you want to change the IP address to another
range, first set the gateway in the new range and then change the IP address.
Example: if you want to change the IP address to "192.168.100.23", first change
the gateway to "192.168.100.1".
The VLAN configuration contains ID, priority, IP address and subnet mask data.
The standard ID is three and must match that of the DOM or SCU. The IP address
should NOT conflict with others and can be set to the same IP address as the
device.
The time of the device automatically lock the screen and close the backlight. It is
possible to setting the time to 1 min, 2 min, 5 min, 10 min, 30 min, 1 hour or OFF.
The date and the time of the device. Settings are lost if the internal battery fails
or is removed.
The device's language settings can be altered at any time. The following
languages are supported:
English
Danish
Romanian
simplified Chinese
The screen brightness of the device
The number of the DKM plus available and the total number of the DKM plus
configured.
The used and total space each for Audio, VA Audio and Recording
The device where the D1 Designer configuration file is stored. Displayed as
follows: Device system number: Device's name: Device's IP
The device's physical address.
The version information of the device.
Ethernet Touch Call Station (ETCS)
German French
Swedish Norwegian
Turkish Russian
Dutch
Polish
Ukrainian
33