3 B " Schedule" Page - Honeywell ETCS Operation Instruction Manual

Ethernet Touch Call Station (ETCS)
3.4 " Schedule" page
1 3 B
Available parameters of scheduled calls:
Fig. 25: "Schedule" page
Fig. 26: "Edit Schedule Call" page
26
For specific broadcasts within a specified timeframe, simply configure
the scheduled calls via D1 Designer or directly on the ETCS interface.
The "Schedule" page will display the broadcasts of current user. Touch
"All On"/ "All Off" on the interface to turn on or close all preset
scheduled calls.
Touch "Edit" to change to the editing mode. Then, you can modify the
scheduled call settings or delete the call. Only scheduled calls
configured on the ETCS interface can be modified and deleted, while
those configured on D1 Designer cannot.
Time: the start time of scheduled calls.
Name: the name of the scheduled call.
• Repeat: the scheduled calls activated for any weekday. Without
any weekday selected, the call is activated "Only once".
• Loop: the loop number of calls, ranging from "1" to "250" or
"Forever".
• Gap Time: a gap between the completion of the current calls and
the start of the next looped calls.
FB 798685.GB0 / 03.20