Table of Contents
Advertisement
Check details about a predefined call:
• Touch the
button at the end of each predefined call, and then the "Details" page will be shown.
Fig. 6: "Details" page
Predefined call name and description
Details include the following:
Number of repetitions: The repetitions number of the call, ranging from "1" to "250" or "Forever".
Time between repetitions: Time until the next repetition begins.
Priority: The priority of this predefined call.
Presignal: The gong can sound 1 x, 2 x or 3 x as a presignal.
Continue connection and partially connected: Display Conflict for this call.
Volume: The volume is relative to the base volume of the respective source (microphone, audio file, or
line in) and is applied during calls.
Source: The configured sources assigned to this call.
Group: The single/multiple group(s) assigned to this call.
Operation area
"Prelisten", "Start", or "Send", as well as perform some advanced operations in "More" for a predefined
call. "Prelisten" and "Send" are not available for live predefined call (source assigned to microphone or
line in), and their properties cannot be changed. Under "More", "Add Schedule Call" copies the current
predefined call to the list of
predefined calls activated by the "Start" button.
• Only the volume of local audio sources being broadcasted may be adjusted, not network
audio sources.
• Prelisten has the highest priority and takes place via the local loudspeaker. If other
announcements are being made at the same time over the local loudspeaker, these may
be interrupted or mixed with other announcements.
Pre-selected audio files for listening via the local loudspeaker are stored in the active
playlist.
FB 798685.GB0 / 03.20
schedules.
The volume bar can only be used to adjust the source volume of
Ethernet Touch Call Station (ETCS)
11
Advertisement
Table of Contents
