Ethernet Touch Call Station (ETCS)
3.6.4 Volume Settings
The volume of a local device and network device can be adjusted in the ETCS. Tap "Volume Settings" on the
"More" page and the "Node" page will appear as shown below.
This operating function is only visible to the relevant user. This operation is only visible for the root and
poweruser.
Fig. 37: "Node" page
Local Volume
Under "Local Volume", the volume levels of "Input", "Output", and "Miscellaneous" can be adjusted.
Fig. 38:
"Local volume" page
For a network devices (DOM), the volume levels of configured DAL input and output, configured amplifiers,
miscellaneous, and AVC input can be adjusted.
36
for volume adjustment
FB 798685.GB0 / 03.20