Daily Shutdown - Graco GX-7A Instructions Manual

Operation

Daily Shutdown

NOTE: Follow when gun is out of service for any length
of time. Daily disassembly of gun for cleaning is not
recommended if it has been operating properly.
However, if you remove the gun from the coupling block
(J), flush and clean thoroughly.
1. Perform the Pressure Relief Procedure, page 17.
2. Set the safety lock (H) to OPEN.
H
Red Band
ti39023a
20
OPEN
Red band exposed to
spray.
3. Disconnect the air supply from the gun.
4. Shutdown the proportioning unit as required. See
your Proportioner manual, Related Manuals, page
2.
5. Clean the gun required. See Clean Spray Gun,
page 24.
NOTE: Do not disassemble the gun daily for cleaning if
it is operating properly. However, if the gun is removed
from the coupling block (J), it must be flushed and
cleaned thoroughly.
311321V