Shutdown
Daily Shutdown
Failure to perform this procedure correctly and accord-
ing to the prescribed schedule can result in poor mix-
ing, fluid leaking, and cured material in or on the gun.
1. Perform Pressure Relief Procedure.
2. Solvent flush at 80-100 psi (550-700 kPa,
5.5-7.0 bar) for five seconds.
3. Loosen then remove air cap retaining ring.
3A0232ZAA
NOTICE
4. For internal mix guns, remove mixing element.
5. Remove front head.
Shutdown
ti17896b
ti17897b
21