Maintenance
Maintenance
Use supplied tool kit 296835. See Tool Kit, page 52.
Gun Service Kits
Use either the 1-Quart Gun Service Kit (296980) or
3-Gallon Gun Service Kit (296981) to perform daily
flushing of spray gun without disassembly.
F
. 16: 1-Quart Gun Service Kit
IG
Refer to 1-Quart Gun Service Kit instructions in your
Gusmer Gun Service Kits manual. See Related
Manuals, page 2.
F
. 17: 3-Gallon Gun Service Kit
IG
Refer to 3-Gallon Gun Service Kit instructions in your
Gusmer Directional Valve Kit manual. See Related
Manuals, page 2.
24
Clean Spray Gun
Chemicals used while spraying may cause the gun
surface to become hot to touch. Thoroughly flush the
gun block (B) with gun cleaner before removing the
valving rod (N) or mixing components from the gun
block. Also allow chemicals in the spray gun to cool
before cleaning.
Thoroughly flush the gun block (B) with gun cleaner
before removing the valving rod (N) or mixing
components from the gun block. Also allow chemicals in
the spray gun to cool before cleaning.
This procedure makes use of the 1-Quart or 3-Gallon
Gun Service Kit.
1. Perform the Pressure Relief Procedure, page 17.
2. Set the safety lock (H) to CLOSED (SERVICE).
H
ti39025a
3. Close both manual valves (C).
C
CLOSED (SERVICE)
ti39022a
311321V