Display Ups/Power Conditions; Enable/Disable Alarm - Tripp Lite LCDT Series Owner's Manual

Basic Operation

Display UPS/Power Conditions

Line Power Mode LCD Data
The LCD screen offers 6 screens of UPS and site power information as the UPS is operating in line power mode. To advance to
the next screen, press the
1. OUTPUT VOLTAGE
2 3 0
2 3 0
4. OUTPUT LOAD WATTAGE
Battery Power Mode LCD Data
The LCD screen offers 6 screens of UPS and site power information as the UPS is operating in battery power mode. When the
UPS switches to BATTERY MODE, the UPS will automatically switch to report ESTIMATED RUNTIME. To advance to the next
screen, press the button. The screens are displayed in this order:
1. ESTIMATED RUNTIME
4. OUTPUT LOAD PERCENTAGE
6 0
6 0

Enable/Disable Alarm

To enter silent mode, press and hold the
to indicate the unit is in silent mode. To exit silent mode, press and hold the
icon will disappear from the LCD screen to indicate it's no longer in silent mode.
Note: Silent mode can only be selected while the unit is in online mode. Silent mode will deactivate the beeper completely.
To temporarily mute the alarm while the unit is in battery mode, press and hold the
LCD screen to indicate that the alarm has been temporarily muted.
Note: The low battery alarm will still sound even if the battery alarm is temporarily muted.
continued
button. The screens are displayed in this order:
2. INPUT/OUTPUT FREQUENCY
1
1
MUTE
MUTE
5. INPUT VOLTAGE
4
4
MUTE
MUTE
2. OUTPUT VOLTAGE
1
1
MUTE
MUTE
5. OUTPUT LOAD WATTS
4
4
MUTE
MUTE
button until you hear an audible beep. The
2
2
5 0
5 0
MUTE
MUTE
5
5
2 3 0
2 3 0
MUTE
MUTE
2
2
2 3 0
2 3 0
MUTE
MUTE
5
5
MUTE
MUTE
button until you hear an audible beep. The
7
3. OUTPUT LOAD PERCENT
6. BATTERY VOLTAGE
3. OUTPUT FREQUENCY
5 0
5 0
6. BATTERY VOLTAGE
icon will appear on the LCD screen
button until the icon flashes on the
3
3
MUTE
MUTE
6
6
MUTE
MUTE
3
3
MUTE
MUTE
6
6
MUTE
MUTE