Plustek SmartOffice PS286 Plus User Manual page 54

6 TWAIN Help
documents and apply the same settings, you can just select this profile from
the drop-down list and then click the Scan button.
To use an existing profile
1. Load the document(s) into the ADF.
2. Select a scan profile from the drop-down list of Profile. Scan settings defined
under this profile are loaded and displayed on the TWAIN interface.
3. Click the Scan button.
4. The image(s) will be scanned with the preconfigured settings. No need to
spend extra time in configuring the scan settings.
To edit an existing profile
1. Load the document(s) into the ADF.
2. From the drop-down list of Profile, select the scan profile you want to edit.
3. Configure the settings. Scan an image to make sure the current settings meet
your needs.
4. Enter the original profile name in the white area beside the word Profile.
Note: Do not select this original profile name from the drop-down list of Profile.
Doing so will load the original settings to overwrite what you have just
configured.
5. Click the Save button.
This scan profile is now updated with the new settings.
To Manage Existing Profiles
Clicking the Manage button opens the
you can delete or rename existing profiles, as well as save existing profiles
Profile Management window where
All rights are reserved.