Plustek SmartOffice PS286 Plus User Manual page 150

The scanner starts to scan immediately and carry out the corresponding action
according to settings you have set up in the Button Configuration window.
Attention
Configure Button Settings
Within the "Button Configuration" window, you can find a row of icons running
through the left side of the window. Each icon represents a scanning task, and the
number underneath corresponds to the function number displayed on the scanner front
panel. Nine frequently-used scanning tasks are pre-configured for your convenience to
start scanning immediately. You may, however, customize the settings of every nine
tasks to best meet your needs and preferences. Follow the steps described below:
1. Do one of the following to open the Button Configuration window:
Double-click the icon
scanner model name.
Click the icon
Right-click the icon
Configuration... in the pop-up menu that opens.
2. Select a task number by clicking on the icon.
3. Select the desired function from the drop-down list of Button Template and
adjust button settings.
Place only text documents for OCR purposes. Do
not scan a photo using the OCR button.
in Finder > Applications > Plustek > Your
in the Dock.
in the Dock, and then choose Button
20