Plustek SmartOffice PS286 Plus User Manual page 213

scanning a stack of documents by ADF, you may enable this function to check
paper overlap (i.e., 2 or more pages stuck together when being fed through the
ADF).
the Scanner User's Guide to properly load the paper into the ADF.
Global Settings
Click the Global settings button to configure settings of Blank Page
Sensitivity, Image Edge Fill and Multi-Feed Detection (This function may or
may not be available depending on the scanner model you purchase.).
Blank Page Sensitivity
Blank Page Sensitivity is used to adjust the remove condition of blank pages
that will be scanned into the computer. Sensitivity values are primarily a
measure of blank page. The larger the sensitivity value, the more scanned
pages will be treated as blank pages and removed. Slide the thumb of the scroll
bar to the right or left, and the current value is shown to the right of the scroll
bar.
Image Edge Fill
When you scan by the Color Mode, you may click
button for black edge fill.
When you scan by the Grayscale Mode, you may click
fill or
When you scan by the BW mode, you may click
button for black edge fill.
Tick the check box of All sides match, the widths of four sides would be set to
be the same. You may adjust the width by clicking
this check box, then you can adjust the width of each side individually.
Multi-Feed Detection (This function may or may not be available depending on
the scanner model you purchase.)
Choose the processing option for the scanner to perform when a multifeed has
occurred.
Action When Detected
All rights are reserved.
To prevent multi-feed errors, please follow the instructions in
button for black edge fill.
Button Configuration Window Overview
button for white edge fill or
button for white edge fill or
buttons. If you do not tick
47
button for white edge