Plustek SmartOffice PS286 Plus User Manual page 15

b. Click on the Yes button if the User Account Control dialog pops up.
Afterwards, please skip to procedure 5.
4. For Windows 8 & Windows 10:
a. Insert the Setup/Application DVD-ROM, included with your scanner, into your
DVD-ROM drive. Click on the pop-up notification, then click Run install.exe in
the pop-up window. If you miss the pop-up notification, please eject and re-
insert the Setup/Application DVD-ROM.
b. Click on the Yes button if the User Account Control dialog pops up.
Afterwards, please skip to procedure 5.
5. Follow the on-screen instructions to install all software that your new scanner
requires. If the pop-up wizard window appears click Next, and click Install this
driver software anyway in the Windows Security window then click Finish in the
wizard window.
6. After the software is installed, you will be prompted to perform the scanner
calibration. If you are not prompted to perform the scanner calibration, please skip
to procedure 9.
7. Insert the special calibration sheet into the ADF of the scanner, with arrows toward
the scanner buttons.
11