The Destination List will be displayed:
•
Press the + symbol to add a stopover.
You will switch to the Choose stopover screen. You may choose stopovers like your home or work
addresses, a bookmark, a point of interest, a recent location or by searching for an address or pinpointing
a destination on the map.
Once you have added stopovers (with the + symbol) and returned to the Destination List, you have
several options:
•
With the + symbol you can choose additional stopovers.
•
To change the order of the stopovers, select a stopover and then use the up and down arrows to
move it up/down in the list.
•
With the trash symbol you can delete a selected stopover.
Once you have chosen your route, you have several options. You reach those options by pressing the
menu symbol (bottom right-hand corner of the screen).
•
Press Simulate to simulate the route to come.
•
Press Start Navi to start guidance. The display will switch to the navigation map.
Bushnell NAV500 Navigation Software Manual
14
1.0.doc
© Bushnell 2006. All rights reserved.
06-09-21