Bushnell Neo Quick Start Manual

Quick Start Guide
Install Software
1
• Insert CD included with your product into computer.
• Open the appropriate CD drive to view disk contents.
• Select "Bushnell Neo Installer" to start the install.
• Select "USB Driver Setup" to install required drivers.
• Select "Sync Application" to install sync software.
• Launch software from "Bushnell Neo Sync" icon on
desktop.
Note: Software updates available at: http://www.bushnellgolf.com/gps/yardage_neo.cfm
Connect Cable
2
• Connect provided cable to available USB port on
computer.
• Insert other end of cable into mini USB port on
device.
• Hold power button for approximately 2 seconds.
• "USB Mode" message will appear on the device
when ready to accept data.
Download GPS Data
3
• Launch Bushnell Neo Sync application, and click the
"GPS Download" tab. Fill in the "Join Now" info to
setup an iGolf membership (if already a member, just
"Log In").
• Once logged in to iGolf.com, enter the name of a
golf course, select the country from the "All Courses"
pulldown, and click "Search". Find your course in the
list of search results.
• Under "GPS" for the course listing, click "Yes", then
"Download GPS & Scorecard".
Note: Once successfully downloaded, the course
name will appear in the "My Courses" section in
the left column of the sync application.