4.6
Binding the evotouch controller to the HM80 mixing valve controller
4.6.1
Binding procedure
f
Follow the guided or expert configuration until the
following screen appears.
f
Press both buttons (1) and (2) at the HM80 for approx.
4 seconds until the LED (3) flashes regularly.
f
Position the
evotouch controller as close as possible
to the HM80 mixing valve controller.
f
Press the BIND button on the
to send the bind signal to the HM80 mixing valve
controller.
The LED (3) of the HM80 is switched OFF to confirm a
successful binding.
i
Binding is terminated automatically after 3 minutes.
Application Manual
evotouch controller
3
2
1
35