Binding The Evotouch Controller To The Opentherm-Bridge Boiler Feedback - Honeywell evohome Applications Manual

4.5 Binding the evotouch controller to the OPENTHERM-Bridge boiler
feedback
i
The following modules can be used for boiler feedback as well: BDR91, HC60NG, R6660D.
For the BIND buttons and checking RF communication of these modules see section 4.4.
4.5.1 Binding procedure
f Follow the guided or expert configuration until the
following screen appears.
f Press and hold the bind button (1) of the OPENTHERM-
Bridge for 5 seconds to activate the bind mode.
Press the BIND button on the the
f
to send the bind signal to the OPENTHERM-Bridge.
The red LED of the OPENTHERM-Bridge is switched
off to confirm a successful binding.
i
Binding is terminated automatically after 5 minutes.
Application Manual
evotouch controller
33