How To Adjust A Settings - HANNspree HL407UPB User Manual

User's Manual

HOW TO ADJUST A SETTINGS

Press "MENU" key on the remote control or on the control Panel, then the TV will display the main
menu.
1. Press "◄/►" key on the remote control or ▲/▼ key on the control panel to select the
adjustment sort menu, which includes 3 sorts: PICTURE , SOUND, OSD.
2. Press"▼" key on the remote control or "- CH" key on the control panel to enter the
adjustment sort menu.
3. Pree "▲/▼" key on the remote control or "- CH/+CH" key on the control panel to select
what is needed to adjust in sort menu.
4. Press "◄/►" key on the remote control or or ▲/▼key on the control panel to adjust the valus
or setting.
Note :"◄","►","▲" and
remote control unless specifically defined. The operating instructions in the text below are all based
on keys on the remote control. Understand the keys on the panel by yourself.
PICTURE
PICTURE MODE
CONTRAST
BRIGHTNESS
SATURATION
HUE
SHARPNESS
ASPECT RATIO
COLOR TEMP
NOISE REDUCTION
▼" key in this Manual stand for the direction cursor keys on the
"
Adjust the overall effect of images: Standard , Soft , User , Bright.
Adjust the overall layering of images: increase the analog value to
improve the contrast and decrease the analog value to reduce the
contrast(0-100).
Adjust the overall brightness of images:
to improve the brightness and decrease the analog value to reduce the
brightness (0-100).
Adjust the color depth of images:
improve the depth and decrease the analog value to reduce the depth
(0-100).
Adjust the hue of images:
green and decrease analog value to increase purple (0-100); the hue
function in only valid in NTSC system.
Adjust the sharpness of images:
increase the definition and decrease analog value to reduce the
definition (0-100).
Adjust the aspect ratio: 16:9 , 4:3 , Subtitle , Film . PC Mode
Adjust the overall color temperature of images: Standard , Warm,
Cool .
Set the grade of noise reduction: Middle , High, Off, Low.
14
increase the analog value
increase the analog value to
increase the analog value to increase
increase the analog value to