How To Adjust A Settings - HANNspree HP225HFB User Manual

User's Manual

HOW TO ADJUST A SETTINGS

BRIGHTNESS/ CONTRAST
BRIGHTNESS
CONTRAST
PICTURE MODE
ACTIVE CONTRAST
LOW BLUE MODE
RESPONSE TIME
IMAGE
H-POSITION
V-POSITION
CLOCK
PHASE
SHARPNESS
Adjust the brightness value of the display according to your
preference. Select「BRIGHTNESS」option to adjust the
brightness value.
Adjust the contrast value of the display according to your
preference. Select「CONTRAST」option to adjust the contrast
value.
Select the preset mode according to your preference: PC/
MOVIE/ GAME/ ECO
[The availability of this function depends upon the selected
model]
Optimal setting for high contrast images or videos. The dark and
light areas of the image are automatically detected, and the
contrast is enhanced to provide a clearer, sharper image. Also,
you may select the「ACTIVE CONTRAST」option.
Select the「LOW BLUE MODE」option to adjust the low blue
light of the display.
Setup the display response time through the Response time
function. Available settings are MINIMUM,
INTERMEDIATE, and MAXIMUM.
specific models only.]
Select the 「H-POSITION」 option to shift the screen image to the
left or right. Enter the option and adjust the level.
only]
Select the 「V-POSITION」 option to shift the screen image up or
down. Enter the option and adjust the level.
Select the 「CLOCK」option to reduce the vertical flicker of
characters on the screen. Enter the option and adjust the level.
[For VGA only]
Select the「PHASE」option to reduce the horizontal flicker of
characters on the screen. Enter the option and adjust the level.
[For VGA only]
Select the「SHARPNESS」option to adjust the sharpness of the
display. Set the value from 0 to 100.
14
[This feature is limited to
[For VGA
[For VGA only]