How To Adjust A Settings - HANNspree HL326UPB User Manual

HOW TO ADJUST A SETTINGS

Press ''MENU'' key on the remote control
or on the control
panel, then the monitor will display the
main menu.
1. Press "◄ / ►" key on the remote control
or '' ▲/▼ ''key on the control panel to select
the adjustment sort menu,which includes 4
sorts: PICTURE, SOUND, TIME,
OPTION.
2. Press "▲/▼" key on the remote control
or '' ▲/▼ '' key onthe control panel to select
what is needed to adjust in sort menu.
3. Press "◄/►" key on the remote control or '' Vol+/Vol- '' key on the control panel to adjust the
value or setting.
4. When the main menu appears on the screen, press "MENU" key to exit; when submenu appears
on the screen, press "Exit " key to return to previous menu; press "SOURCE " key to show the signal
source selection menu, and press it again to exit from the menu.
5. In the process of menu operation, the unavailable options in current state will be in gray.
Note: "◄","►","▲" and "▼"in this Manual stand for the direction cursor keys on the remote
control unless specifically defined. The operating instructions in the text below are all based on keys
on the remote control. Please understand the keys on the panel by yourself.
PICTURE
Item Function
Select your viewing preference from 4 options.
Picture mode
Adjust the highlight intensity of the picture, but the
Contrast
shadow of the picture is invariable.
Adjust the visual perception output of the entire
picture,it will effect the liuminousness of the
Brightness
picture.
Control the colour.
Color
Increase this setting to see crisp edges in the
Sharpness
picture; decrease it for soft edges.
Color Cycle among color temperature display modes:
Cool/Medium/Warm.
Temperature
Enter the Noise Reduction to
Noise Reduction
select :Off/Low/Middle/High.
Operation
Press▲ or ▼to highlight
an item, press OK or ►
button to enter submen.
13
User's Manual
Range
• Dynamic
• Standard
• Mild
• User
0-100
0-100
0-100
0-100
• Cool
• Medium
• Warm
• Off
• Low
• Middle
• High