How To Adjust A Settings - HANNspree HS275HFB User Manual

HOW TO ADJUST A SETTINGS

BRIGHTNESS
BRIGHTNESS
CONTRAST
PRESET MODE
ACTIVE
CONTRAST
OVERDRIVE
IMAGE SETUP
H-POSITION
V-POSITION
CLOCK
PHASE
IMAGE RATIO
COLOR SETUP
5500K
6500K
9300K
Low Blue Mode
USER
Adjust the brightness value of the display according to your preference.
Select「BRIGHTNESS」option to adjust the brightness value.
Adjust the contrast value of the display according to your preference.
Select「CONTRAST」option to adjust the contrast value.
Select the preset mode according to your preference: PC/ MOVIE/ GAME/
ECO
[The availability of this function depends upon the selected model]
Optimal setting for high contrast images or videos. The dark and light areas
of the image are automatically detected, and the contrast is enhanced to
provide a clearer, sharper image. Also, you may select the「ACTIVE
CONTRAST」option.
Setup the display response time through the Response time function.
Available settings are ON, and OFF.
models only.]
Select the 「H-POSITION」option to shift the screen image to the left or
right. Enter the option and adjust the level.
Select the 「V-POSITION」option to shift the screen image up or down.
Enter the option and adjust the level.
Select the 「CLOCK」option to reduce the vertical flicker of characters on
the screen. Enter the option and adjust the level.
Select the 「PHASE」 option to reduce the horizontal flicker of characters on
the screen. Enter the option and adjust the level.
When the aspect ratio of screen is distorted, you may make adjustments by
using this function.「WIDE」indicates full screen display, which does not
ensure the image is shown as is or in initial scale. 「4:3」indicates scaling
by the proportion of original images, which may cause the screen showing
black bands. [The availability of this function depends upon the selected
model]
Adjust the color temperature value of the display according to your
preference: 5500 /6500/ 9300 / Low Blue Mode.
Move the cursor to the User option and select it,
1. To adjust the red, enter the「R」option and adjust the level.
2. To adjust the green, enter the「G」option and adjust the level.
3. To adjust the blue, enter the「B」option and adjust the level.
[This feature is limited to specific
[For VGA only]
[For VGA only]
13
User's Manual
[For VGA only]
[For VGA only]