3.13
Sub Fan Motor ASSY
(1)
Slide the sub fan motor ASSY upwards.
Manufacturer sticker side
Main Cover
Note:
When re-assembling the sub fan motor, ensure that the side on which the manufacturers
sticker is attached is facing the main frame.
3.14
Main Fan Motor ASSY
(1)
Remove the two M4x12 screws securing the fan motor holder.
(2)
Remove the fan motor holder from the printer.
(3)
Remove the main fan motor from the fan motor holder.
Taptite, bind
M4x12
Fan Motor
Main frame
Sub Fan Motor
Fig. 3-23
Fan motor holder
Fig. 3-24
III-14
Taptite, bind M4x12
Manufacturer sticker side